Product overview

Hologram（HOL）ink contains hologram treated powders that disperse lights, and can be used to create printed materials in rainbow colors. It shines like a diamond not only in sunlight, but also in the fluorescent light of a room, and its brilliance is further amplified by changing the angle of the light.

  • Functional ink

Application

  • Decoration for home appliances, graphics, tamper proof watermark

Features, Function

  • Change to rainbow colors under sunlight or weak light in a room
  • Red, green, and blue and other colors are spotted on one printing side
  • Coloring effect increases on a black base
  • Pearl/Metallic

Substrate

  • According to each ink type

Dilution

  • 15 to 20% (please refer to the dilution of solvent type screen ink)
  • *Please use the solvent listed in catalog for each ink type.
  • *Stir well before use, as special color materials have a tendency to precipitate.

Promoter

  • SM-40 DEFOAER 2%（For anti-foam and improvement in leveling）

Recommended cleaner

  • Screen Cleaner L2

Mesh

  • T 150 to 200 mesh（Coverage is about 15 to 25 m2/kg at T150 mesh）

Drying, Curing

  • According to each ink type

Standard colors

Introduction of
Color Guide

  • Particle diameter S （50×50μm）　　　 851 HOL SILVER S Silver
  • Particle diameter M （50×100μm）　 　851 HOL SILVER M Silver

Caution

  • Checking before production: Adhesion and resistance properties may change due to differences in substrates, processes, printing and drying conditions. Be sure to check the adhesiveness and resistance properties before mass production printing
  • Ink shelf life: 6 months from production date, unopened.

Safety

  • Please refer to respective ink catalog for transportation information.

Handling

  • Use safety gloves and eyeglasses to protect skin and eyes. If the ink comes in contact with skin, wash with soap and plenty of water (or lukewarm water) and consult with a doctor.
  • Containers should be closed tightly after use and stored in a cool and dark place.
  • SDS is available upon request. Please request a copy and read it carefully before handling the products.

Resistance

Test item Test Conditions Test results
Adhesion JIS K 5600-5-6 ISO2409 1mm interval, 6×6 cellophane tape, check peel off 0（no peel）
Heat 80℃, 400 hrs., check appearance and peel off No defect
Hot Water JIS K 5600-6-2 ,ISO 2812-2　Soak 400 hrs., in 40℃ tap water, check appearance and peel off No defect
Humidity JIS K 5600-7-2（Continuous condensation）,60℃ 90％RH 168 hrs.,check appearance and peel off No defect
Acid Soak 12 hrs. in 0.1N HCl, check appearance No defect
Alkaline Soak 30 min in 0.1N NaOH, check appearance No defect
Engine Oil Soak 1 hr. in engine oil, check appearance No defect
Accelerated Weathering JIS K 5600-7-7 ISO 11341　Irradiance 60W/m2、BP Temp.63±3℃, Raining rate 18 min/120 min, 500 hrs.、check color fade and peel off 500 hrs. slight color change

Test Condition

  • Test condition 【Ink: EG type】 【107 CATALYST 7％】　【60℃　30 min】 【T 150】 【Substrate: PC 0.5t and PET 0.188】
  • Above resistance test results are measured results in our laboratory and they are not guaranteed values.
  • Information contained in this catalog may change without prior notice.