Product overview

SP-2100AU CLEAR is an isocyanate-hardening, urethane-type clear, developed as overcoat clear for screen printing of Teikoku VK ink. It is a two pack curing type clear with excellent gloss, weather resistance and resistances.

  • Functional ink

Application

  • Sticker
    Overcoat clear for fleet marking of cars and motorcycles.
    Overcoat clear for highly weather resistance PVC sticker for outdoor signboards.

  • Automobile, Motorcycle

  • Home Appliance (IoT)

  • Smartphone, Tablet, Smart watch

  • Sensor

  • Game

  • Others

Features, Function

  • Excellent weather resistance and super gloss finish.
  • Good balance of hardness and softness, excellent in various types of resistances.
  • Superior adhesion to PVC stickers.
  • Pot life is longer than 8 hrs.
  • Gloss, Matte
  • Weather resistance

Substrate

  • PVC
  • PVC

Dilution

  • Z-704 SOLVENT (standard) 　　　Dilution : 10 to 20%

Catalyst, Promoter mixing

  • 210 CATALYST 14%（standard） Pot life : 8 hrs.
  • *The ink will turn to gel after the pot life has expired. Be sure to mix only enough to use

Recommended cleaner

  • Screen Cleaner L2

Mesh

  • T 180 to 225 mesh（Coverage would be about 25 to 35m2/kg at 200 mesh）

Drying

  • 60℃ 60 min
  • *After drying at 60℃ for 1 hr., leave on a rack for about 15 hrs. before stacking.
  • *Application tape should be applied after drying at 60℃ for 1 hr. and after another 48 hrs.

Caution

  • Checking before production: Adhesion and resistance properties may change due to differences in substrates, processes, printing and drying conditions. Be sure to check the adhesiveness and resistance properties before mass production printing.
  • To confirm curability, conduct an alcohol resistance test after printing and heat drying.
  • Insufficient drying and excess or deficiency of Catalyst can be checked. Resistance lasts 15 to 20 times immediately after heating, more than 50 times when complete drying.
  • Ink shelf life: 24 months from production date, unopened.

Safety

  • UN No.: 1210
  • UN Classification Class 3 Flammable Liquids（Flash point is over 23 Degree C）

Handling

  • Use safety gloves and eyeglasses to protect skin and eyes. If the ink comes in contact with skin, wash with soap and plenty of water (or lukewarm water) and consult with a doctor.
  • Containers should be closed tightly after use and stored in a cool and dark place.
  • SDS is available upon request. Please request a copy and read it carefully before handling the products.

Resistance

Test item Test Conditions Test results
Heat JISK5600-6-3：ISO 3248: 80℃, 168hrs., check appearance and peel off from the substrate No defect
Hot Water JIS K 5600-6-2： ISO 2812-2, Soak 168 hrs. in 40℃ hot water、check appearance and peel off from the substrate. No defect
Humidity and cool-heat cycling test JIS K 5600-7-4 3 cycles:80℃（4.5H）→20℃（0.5H） →-30℃(4H)→20℃(0.5H)→50℃ 95％RH（14H）→20℃（0.5H）（0.5H）→50℃ 95％RH（14H）→20℃（0.5H） No defect
Heat JISK5600-6-3：ISO 3248: 80℃, 168 hrs.、check appearance and peel off from the substrate No defect
Hot Water JIS K 5600-6-2： ISO 2812-2, Soak 168 hrs. in 40℃ hot water、check appearance and peel off from the substrate No defect
Boiling Soak 5 min in boiling water, check appearance and peel off from the substrate No defect
Oil Soak 7 hrs. in engine oil, check appearance and peel off from the substrate No defect
Kerosene Soak 1 hr. in white kerosene, check appearance No defect
Gasoline Soak 30 min in gasoline, check appearance and peel off from the substrate No defect
Window washer Soak 1 hr. in window washer, check appearance No defect
Wax remover Soak 30 min in wax remover liquid, check appearance No defect
Detergent Soak 1 hr. in neutral detergent, check appearance No defect
Alcohol Soak 30 min in ethanol, check appearance No defect
Acid 7 hrs. in 5％ H2SO4, check appearance and peel off from the substrate No defect
Alkali 7 hrs. in NaOH, check appearance and peel off from the substrate No defect
Scrub Gakushin scrub tester, cotton, weight 200g, 1000 back and forth, check color fade No defect
Abrasion JIS K5600-5-9：ISO7784-2（Abrasion ring method）：500g weight,CS17 ring, 100 rounds, check substrate No defect
Elongation (%) Tensilon: 15mm×100mm sheet, tension test at 200mm/min 180%
Tensile strength Tensilon : 15mm×100mm sheet, tension test at 200mm/min 2.0kg/15mm
Shrink by heat Store 100×100mm prints for 48 hrs. at 80℃, check size change: ≦0.1% No defect
Accelerated Weathering （carbon arc） JIS K5400 9.8.1　Weather meter with carbon arc,：BP temp. 63+/-3℃： Raining rate: 18 min/120 min, check color fade and peel off 2000hrs. No defect
Natural weathering JISK5600-7-6、 24 months exposure in Florida, check color fade and peel off No defect

Test Condition

  • Test condition 【SP-2100AU CLEAR】　【210 CATALYST 14%】 【Z-704 SOLVENT 15%】 【60℃ 60 min】 【T 180】 【Substrate: PVC sticker(Hi-S Cal 5010 white)】 【Tested by overcoating on VK-911 Black, 391 Blue, and Silver printed material】
  • Above resistance test results are measured results in our laboratory and they are not guaranteed values.
  • Information contained in this catalog may change without prior notice.

FAQ

What is screen printing?

Screen printing is a type of stencil printing which uses a technique of duplicating the image from a design made on mesh stencils.

When printing ink goes through the mesh, it transfers the image onto the substrate material. Other than air and water, any substrate materials are printable. Not only flat surfaces, but also curved, specially shaped, and molded products are suitable for screen printing.

FAQ